0 Пользователей и 1 Гость просматривают эту тему.
First, drill and drill bits plus two bolts and two nuts.Then drill the holes, start from about 2cm away from the last bolt on the wingThen once holes are drilled apply a bit of paint to the bare metal to stop any rust problems, for this I just used a touch up pen to go over any bare metalThen put the strut in place and bolt it downThen screws the top in and push the ball headed bolt into the strut and lock the clip:Admire your workGuide created by Lewis and Ultimawhistler
кочерга лучше и надежней. И много ли проводиш времени под капотом?
http://podkapot.ru/catalog/184/2005/ лови